Free sample for 12 Inch 3d Amplifier - CS656 6.5” ABS Ceiling Speaker – Q&S

Introduction

Thanks for using our speaker products. All our products are tested strictly before leaving the factory, with guaranteed quality. Our speakers are widely used in such places as schools, gymnasiums, square halls, parks, parking lots, railway stations, airports, villa communities and mall supermarkets, etc., and they will be your ideal choice for public address system. For better installation, commissioning and use of the product, please read this manual in detail before installation.

Product Features
● 70/100V, 3- 10W with multiple terminals, suited for different field;
● Max. Sound Pressure Level 100 2dB, Effective Freq. Range 130Hz – 18kHz;
 ●Weight 1.0 kg equipped with clamps for mounting convenient;
 ●Made of high quality engineering plastic, long-term durability, never out of shape    and fade;
 ●Driver surround excellent damping, provided with high sensitivity  (93 2dB), long    life, sound clear and sonorousness.

Technical Parameters

Installation & Wiring

1.On the ceiling install a circular hole cut in the 165 170mm a diameter range.

2.Connect audio broadcasting wire to the terminals according to the table below.

3.Pushing the speakers on both sides of the spring clip up and maintain this status     (To avoid spring break it is recommended that this operation while wearing work   ,          gloves and then let go push the speakers embedded in the ceiling )

4.finally, check whether the equipment is installed firmly.