NT-2120/2250/2350/2650 120W-650W IP Network PA Amplifier

With 2 RJ45 100Mbps/10Mbps adaptive network interface
With 100V output, 1-line input and 1 MIC input, LED display
Support USB storage maximum capacity 64G, and infrared remote control
With EMC DC voltage trigger output function
Built-in digital amplifier rated power at 120W / 250W / 350W / 650W
Built-in 1-way fire emergency alarm trigger input interface
Built-in high-performance industrial grade embedded processor
Built-in high-fidelity AD/DA encoding and decoding chip, super decoding ability, support various MP3 decoding formats
Customizable 10 channel power partition to extend the amplifier

Product Detail

Description	IP Network PA AMplifier
Power supply, power consumption	180V-240V/AC 50Hz-60Hz≤100W ≤180W / ≤300W / ≤450W / ≤700W(60W / 120W / 250W / 350W / 650W ）
display screen	LED Digital screen
Mode of operation	Infrared remote control
CPU	Imported industrial grade embedded processor
Network communication protocol	TCP、UDP、ARP、ICMP、IGMP、HTTP
The network interface	10Mbps/100Mbps Adaptive dual network interface
Audio coding format	MP2/MP3/PCM/ADPCM
Audio sampling format	8Kbps-48Kbps,16bit
Signal to noise ratio	AUX IN ≥80dB MIC IN ≥70dB
Power amplifier output frequency response	50HZ-20KHz ±3dB
Power amplifier output	60W/ 120W / 250W / 350W / 650W （100V）
Power amplifier output distortion	≤1% (rated power)
Interface	2 RJ45 network ports, 1 USB port, 1 SD card interface, 1 route input, 1 route output, 1 microphone input, 1 EMC trigger interface, 2 channels 100V constant voltage amplifier output,
Partition	10-way power partition (customizable)
Operating temperature, temperature	-10℃～80℃， ≤90%RH (no condensation)